.png)
Clean room door for mask manufacturing workshop
Bona is a clean room panel, door and window manufacturer in China supplying construction materials for clean room projects.
The workshop for mask manufacturing workshop has very high requirements for doors, mainly because mask production has strict requirements for environmental cleanliness. The design of clean room door for mask manufacturing workshop needs to minimize the entry of pollutants into the workshop.
The main characteristics of the clean room door for mask manufacturing workshop are:
-
Good airtight-ness: The joint between the door and the door frame should be tight, which can effectively prevent air leakage and ensure the cleanliness of the workshop.
-
Good sealing: A sealing strip should be installed on the door to effectively prevent the entry of pollutants such as dust and bacteria.
-
Good corrosion resistance: Due to the possible presence of disinfectants and other chemicals in the workshop, door materials should have good corrosion resistance.
-
Easy to clean and disinfect: The surface of the door should be smooth, flat, and seamless, making it easy to clean and disinfect.
-
High strength: The door should have sufficient strength to withstand the wear and tear caused by frequent opening and closing and disinfection.
-
Quick opening and closing: In order to improve production efficiency, the door should be able to open and close quickly.
-
Transparent or visible: Observation windows or transparent panels should be installed on the doors for staff to observe the internal situation of the workshop.
​​
High end workshops may be equipped with automatic doors, which are controlled by sensors to facilitate personnel access. Common types of clean room door for mask manufacturing workshop should be with fast opening speed and good sealing performance, it is suitable for areas with frequent entry and exit.
Different levels of clean workshops have different requirements for doors, and the door should be selected according to the cleanliness level of the workshop.
Doors at different positions have different functions, and the appropriate door type should be selected according to the position of the door.
Different production processes have different performance requirements for doors, and doors should be selected based on the characteristics of the production process. Like in some production area needs a special detergent to clean, you can consider the stainless steel door for better anti-corrosion. ​
This is a project of clean room doors for mask manufacturing workshop sent to Africa for your reference, if you have any need for doors, you can take into the consideration of the cleanliness level of the workshop, the frequency of personnel and material entry and exit, and also important is your budget, and we will provide you the options.