Clean room maintenance

Except an higher cost of insulated sandwich panel for a clean room project to ensure a good quality, but regular maintenance of a clean room after installation completed is also important. 

In fact, no matter what type of sandwich panel for a clean room, it needs to be cleaned and protected on a regular basis. Only in this way can we really see the good cleaning effect and ensure the sterility of the workshop.

• Regular cleaning is very important

It is not so difficult to clean the sandwich panel in daily clean room maintenance. In fact, it only needs simple scrubbing, which naturally ensures a good cleaning effect. Of course, the actual situation of the specific workshop is different, so the cleaning frequency and method should also be changed.

In fact, after the completion of the clean room workshop project, we should do a good job in cleaning, regular cleaning is very necessary, and special equipment can also be used for cleaning so as to achieve a better cleaning effect. 

• Regular on-site check

The performance of the clean room sandwich panel is good, but if you want to maintain a good cleaning effect, you should still check the metal skin steel sheet regularly to determine whether there is wear or some damage, and then carry out subsequent protection.

We believe that as long as we are able to do a good job of checking all the work, there will be no big problem for the clean room function. And we should also be very clear that sandwich panel is not easy to wear, but once there is a problem, it is difficult to correct, so it must still be checked regularly and do regular clean room maintenance. 

A clean and well-maintained cleanroom environment will give you a efficient operations within your facility. Regular cleaning and on-site check will minimize the risk of contamination to ensure a sterile environment.

Clean room maintenance

ASK A QUOTE

• Cleaning Process and Tool Selection

  
  

The cleaning work in different areas of the clean room has its own frequency requirements and applicable tools, which need to be treated differently. The ground, as an area where personnel and equipment frequently come into contact, should be cleaned after daily production.

For general cleanrooms, a vacuum cleaner with an efficient filter can be used to remove dust particles from the floor. This type of vacuum cleaner can effectively filter out small particles and prevent secondary pollution.

Afterwards, use a specialized mop dipped in an appropriate amount of neutral detergent solution for wiping. The choice of detergent is crucial, as the neutral formula can avoid corrosion to the floor material.

In the clean room of electronic chip manufacturing, anti-static flooring is commonly used on the floor. The use of neutral cleaning agents can protect the anti-static performance of the floor while cleaning. ​

The cleaning frequency of the wall is generally at least once a week. You can choose a non fiber wiping cloth, dip it in purified water for preliminary wiping to remove surface dust, and then use a wiping cloth containing disinfectant for disinfection.

Due to the high position of the clean room ceiling, it is relatively difficult to clean and is usually cleaned every two weeks. Long handled cleaning tools can be used, such as wiping cloth clips with extended rods or specialized ceiling cleaning brushes. Safety should be taken into account during operation to avoid damage or personal injury caused by tool drops. ​

When choosing cleaning tools, full consideration should be given to the special environmental requirements of the clean room. For example, the filtration system of a vacuum cleaner must be efficient to prevent the inhaled dust from being discharged into the air again.

The wiping cloth should be made of materials such as polyester fiber, which will not shed fibers and will not produce new pollutants during the cleaning process. At the same time, all cleaning tools must be strictly cleaned and disinfected after use, and stored in a dedicated cleaning tool storage room to avoid cross contamination.

Clean room maintenance is an interdependent and indispensable precision system. From strict control of personnel and equipment in daily maintenance to deep protection of every corner in the cleaning and disinfection process, every part contributes an indispensable force to maintaining a good environment and stable operation of the clean room.